Doors set the tone for the atmosphere of your home. Therefore, they must be chosen with care. While there are several types of doors, aluminium doors are considered to be the favourite of many as they are highly durable and stylish.
However, it is important to reiterate that these doors require adequate maintenance to always stay in perfect condition.
This guide is a compilation of tips and tricks about how to clean aluminium doors to retain shine and maintenance. It covers effective cleaning techniques and routine care practices to keep your doors looking their best and functioning optimally.
Do Aluminium Doors Need Maintenance?
Maintenance of aluminium doors is essential to achieve good functioning and durability. However, due to its high resistance to wear and tear, most people believe that it is not necessary to maintain aluminium doors.
In reality, cleaning and maintaining aluminium doors regularly is the best way to ensure their longevity.
Also read: Advantages of Aluminium Doors That Everyone Should Know
Maintenance Tips for Modern Aluminium Doors
Frequency of Maintenance
Maintenance of aluminium doors largely depends on the climatic conditions to which they are exposed.
If you live in a dry, dusty region, frequent dusting and occasional washing will be enough.
However, if you live in an urban, industrial or coastal area where there is a high percentage of humidity and a high level of pollution, it is recommended that you carry out maintenance approximately every two months.
Checking the Gaskets
Check the integrity and elasticity of the gaskets every three months. This aspect is crucial because the door’s thermal performance and the indoor comfort of the room rely on it.
Cleaning can be done with a mild dish soap using a soft cloth or toothbrush. Avoid the use of acidic products.
Checking the Door Mechanisms
Check and lubricate the door mechanisms (handles, rods, etc) every year. Before lubricating, clean the mechanisms properly using a soft-bristled brush.
Lubrication should be done with silicone-based lubricant and descaling oils should absolutely be avoided.
Checking the Locks
It is advisable to check the locking mechanism of the door once a year because the passage of time can cause small misalignments, such as loose screws.
Cleaning the Hinges
Most modern hinges do not require the lubrication that they did a few years ago. If they do not work properly, the best option is to disassemble them and clean them properly.
Cleaning the Door Frame
The frames of aluminium doors have to be cleaned several times a year with specific materials and products. You can use a soft cloth, sponge, warm water and mild detergent for cleaning.
Sharp and abrasive objects and aggressive chemicals should not be used as they irreversibly damage the aluminium.
Repairing the Damage
An aluminium door can get damaged due to improper use or other factors. If your door sustains damage, repair it as soon as possible to prevent it from worsening and leading to more serious issues.
Do Not Forget the Glazing
To keep the appearance of glass clean and clear all year round, use a glass cleaner. Spray a minimal amount of cleaner on the glass and wipe it with a microfibre cloth.
Coming to an End
Unlike other types of doors, aluminium doors (including aluminium sliding doors) require minimal maintenance because they are made from a material that is especially resistant to rust and wear caused by external factors.
However, knowing when and how to clean aluminium doors is crucial to ensure that your door is in perfect condition despite the passage of time.
Want to replace old doors in your home with aluminium doors? Contact the experts at AIS Windows and get recommendations on a variety of stylish doors and windows combined with their hassle-free installation at a pocket-friendly rate.
Leave a Reply